Psion Programming Application

If you bought your hand held organiser from Electronic Micro Systems Limited, it should have contained a 3¼ inch floppy disk which contained the Psion Programming Application.   This page allows you to download the latest version of that software.  You can then use PsiWIN (which came with your organiser) to install the software onto your organiser.  It can also be used if your organiser battery has discharged and the application has been lost.

There are two versions of this software:

• The standard eight stage programme (most users require this)
• A special sixteen stage version (you will know if you require this version)

Instructions:

1. Double click the link (above) for the software you require OR place your mouse pointer over the required link above and to down load the file by doing a "right click" and selecting "Save Target As..." option from the list.
2. Place the file ems5000.SIS onto your computer in a known directory (perhaps C:\My Documents\EMS\)
3. Ensure that PsiWIN has been installed on your PC (that is the CD that comes with the Psion)
4. Ensure that the 'Remote Link' on the Psion is set to 'Cable' and the Psion is connected to the PC (see Psion documentation if necessary)
5. Click on 'My Psion'
6. Click on 'Connect'
7. When the connection has been established (indicated by the animated sine wave icon in the tool bar) Click on 'My Psion' then click on 'Install New Program'
8. When prompted by the install program select the file ems5000.sis and Drive C
9. When the program has been installed, you can use it. REMEMBER to turn off the Remote Link before using EMS5000.